Archives

• July 30, 2018

Renold Ajax geared mill spindles offer high power density and long life. Renold uses a roll end piloting system to reduce bore wear and vibration. Typical applications: Roughing mills, finishing mills

Renold Gearflex gear couplings achieve maximum power capacity within a small envelope and have excellent misalignment capacity. Single and double engagement types are available. Torque range: 1,050 to 3,501,207 lb-ft (1.4 to 4,747 kNm) Typical applications: Cranes, steel mills, mining machinery

Renold PM flexible couplings allow for axial, angular, and radial misalignment while dampening vibration and protecting against shock loads. PM couplings require no lubrication or adjustment. A variety of rubber elements are available for optimal performance. Torque range: 106 to 1,720,976 lb-ft (0.14 to […]

The Renold HTB coupling offers protection against severe shock loads. They’re designed for bell housing applications and are intrinsically failsafe. These couplings can handle temperatures up to 400° F (200° C). Torque range: 885 to 29,500 lb-ft (1.2 to 40 kNm) Typical applications: Marine […]

Conductix-Wampfler Safe-Lec 2 conductor bar is rugged and easy to install. The shoes are guided by a v-contact in the bar, and the collector arm articulates through a wide range of motion to keep the shoe in contact with the rail. Safe-Lec 2 is […]

Lovejoy shaft locking devices (SLD) connect hubs solidly to shafts using a keyless mechanical interference fit. They use screw tension to expand the SLD to fill the gap between hub and shaft. This makes them easy to install and remove, and allows hubs to […]

Lovejoy SX type industrial disc couplings are similar to type SU, but have two disc packs. This gives two flex planes, allowing them to also accommodate parallel misalignment. These couplings are torsionally rigid and transfer torque without backlash. Torque range: 2,100 to 1,947,000 lb-in […]

Lovejoy SU type industrial disc couplings consist of two hubs and one disc pack, so it’s only suitable for angular and axial misalignment. No lubrication or maintenance is required, and there are no wear parts, so infinite life is possible when properly aligned. Torque […]

Lovejoy horizontally split grid couplings allow easy access to the grid and are great for tight spaces. These couplings cushion shock loads and can dampen vibration by up to 30%. Torque range: 460 to 1,650,000 lb-in (52 to 186,417 Nm) Typical applications: Compressors, pumps, […]

Lovejoy continuous sleeve couplings are simple and affordable. The patented BUNA N seal design keeps lubricant in and contaminants out. Standard C type couplings are available, as well as special variations such as mill motor, floating shaft, drop-out spacer, and shear pin types. Torque […]