Archives

• July 30, 2018

Wichita Power Take-Off (PTO) clutches are available with air or mechanical clutch engagement. Mechanical PTOs require no pilot bearing, are available with an automatically adjusting clutch and are ideal for vehicular flywheels. Designs are available for in-line or side load applications. Torque range – […]

Wichita Mesur-Fil fluid couplings deliver reliable smooth power transmission, specifically in a soft start or overload application. The coupling is ideal for applications with high inertia loads and designed with no mechanical contact of internal parts. This will insure minimal maintenance and long life. […]

Lovejoy L and AL type jaw couplings require no lubrication and are very reliable. Lovejoy offers the largest variety of stock bore/keyway combinations in the industry. AL couplings use aluminum hubs for lighter weight and corrosion protection. Torque range: 3.5 to 12,500 lb-in (0.4 […]

Bauer Gear Motor BF series shaft-mounted gearmotors are highly efficient and require little maintenance. Mounting is flexible, with the shaft, base, face, flange, and terminal box all variable. BF geared motors come with IP65 enclosures standard, and IP66 is available. Torque range: 66 to […]

Wichita Clutch/Brake Combination (CCB) units provide fast, smooth cycling for stamping presses and metal forming equipment by combining a high performance clutch and spring set brake in a compact assembly. A single air tube actuates both the single plate clutch and the single plate […]

CCA’s Anderson Keyless Clamp Hub is a quick and easy solution to virtually any shaft connection. They can be used on straight, keyed, hydraulic, tapered, or splined shafts. The Anderson clamp hub is installed and removed with only hand tools, no heat or hydraulics […]

Coupling Corporation UltraFlexx couplings have the lowest spring rates in the industry, which will increase the life of driveline equipment. A unique “”strut”” design gives the UltraFlexx a high torque capacity in a small, lightweight package. Torque range: 4,260 to 51,324,000 lb-in (481 to […]

Coupling Corporation of America’s Flexxor diaphragm couplings are extremely flexible and perform exceptionally in high-speed and high-torque applications. CCA uses a unique holed diaphragm design, which has been refined over 50 years. Flexxor couplings require no lubrication or maintenance and are dynamically balanced. Torque […]

Wichita ModEvo tension brakes are modular and provide smooth control at high line speeds. Their design optimizes the use of cooling air at slow speeds to achieve high heat dissipation in either rotational direction. A cooling fan can be added for additional heat capacity. […]

Wichita Clutch Standard Vent clutches are designed for reliable in-line power transmission. The simple air-tube design, with small air volume, speeds engagement and disengagement. It is ideally suited for large inertia loads where smooth controlled starts are needed. Torque range – 7,000 to 30,955,750 […]