Stromag

Periflex Couplings

Periflex couplings from Stromag are flexible rubber couplings for use with internal combustion engines. The Periflex VN is flanged to mount directly to standard flywheels. The Periflex CS is designed to connect an engine flywheel to a cardan shaft flange.

Torque range: 18 to 46,466 lb-ft (25 to 63,000 Nm)
Typical applications: Steel mills, cranes, conveyors, mining, paper machinery, shipbuilding, construction, PTO’s

CA2 Brakes

Stromag’s CA2 series brakes are spring applied and electromagnetically released, providing failsafe braking. Lining wear is automatically compensated for, and brake pads feature a wear indicator.

Torque range: 490 to 8,600 lb-ft (665 to 11,660 Nm)
Typical applications: Overhead cranes, steel mills

2SA Brake

Stromag 2SA brakes are the most powerful electromagnetic brake on the market. Braking is spring applied with electromagnetic release. These brakes have a great reputation for reliability.

Braking force: up to 100 kN (22,480 lb)
Typical applications: Cranes, steel mills

K/D Brakes

Stromag K/D series brakes are spring applied and electromagnetically released, providing failsafe braking. Lining wear is automatically compensated for, and brake pads feature a wear indicator. The brakes can be mounted either horizontally or vertically.

Torque range: 35 to 876 lb-ft (48 to 1,188 Nm)
Typical applications: Overhead cranes

600 Series Brakes

Stromag 600 series of spring-applied, electromagnetically released service brakes fit a variety of applications. Lining wear compensation is accomplished manually. Marine protection is available if necessary.

Torque range: 24 to 814 lb-ft (33 to 1,104 Nm)
Typical applications: Overhead cranes

Series 51 Limit Switches

Stromag Series 51 geared cam limit switches are universal, mechanical switchgears. These limit switches use patented planetary gears and conform to DGUV V17 (formerly BGV C1) standards for stage engineering.

Typical applications: Cranes, wind turbines, stage and theater equipment

Light Cam Limit Switches

Stromag Light Cam series geared cam limit switches are universal, mechanical switchgears. IP65 and IP66 rated housing are available. Geared cam limit switches are an economical solution where EN 60947 T5-1 / IEC 947-5-1 requires the use of positive opening switching contacts.

Typical applications: Cranes, wind turbines, bucket conveyors, stage and theater equipment