Archives

• July 30, 2018

Con-vel constant velocity joints provide true constant velocity. These driveshafts experience no change in velocity or acceleration, smoothly transmitting torque even when joint angles are unequal. Torque range: 169 to 4,725 lb-ft (230 to 6,410 Nm) Typical applications: Steel mill machinery, paper mill machinery, […]

Periflex couplings from Stromag are flexible rubber couplings for use with internal combustion engines. The Periflex VN is flanged to mount directly to standard flywheels. The Periflex CS is designed to connect an engine flywheel to a cardan shaft flange. Torque range: 18 to […]

Spicer Wing series driveshafts are designed for long life, minimal maintenance, and low operating costs. U-joints are available in re-greasable and permanently lubricated options. Wing bearing crosses are forged and case hardened for strength. Torque range: 2,419 to 55,612 lb-ft (3,280 to 75,400 Nm) […]

Conductix-Wampfler slip ring assemblies are customized specifically to best suit your application. R-Series slip rings are easy to maintain, rugged, built for long life. Special slip ring assemblies are available for hazardous duty, high voltage, high amperage, and other unique applications. Typical applications: Generators, […]

Stromag 2SA brakes are the most powerful electromagnetic brake on the market. Braking is spring applied with electromagnetic release. These brakes have a great reputation for reliability. Braking force: up to 100 kN (22,480 lb) Typical applications: Cranes, steel mills

Dana Spicer is one of the most trusted names in cardan shafts. Spicer cardan shafts allow torque to be transmitted across a greater angle than that allowed by flexible couplings. Adjustable length gives flexibility when mounting the driveshafts. Torque range: 400 to 5,000 lb-ft […]

Stromag 600 series of spring-applied, electromagnetically released service brakes fit a variety of applications. Lining wear compensation is accomplished manually. Marine protection is available if necessary. Torque range: 24 to 814 lb-ft (33 to 1,104 Nm) Typical applications: Overhead cranes

Bremskerl Twintec technology consists of an elastic underlayer with a friction lining surface. This provides higher dynamic friction coefficients while reducing lining wear by as much as 80%. Twintec can be combined with almost any Bremskerl material.

Conductix-Wampfler Series 80 push button pendants has a high-impact NEMA 4X rated case and is suitable for indoor or outdoor use. It can accommodate from 2 to 12 buttons, or up to 24 buttons in a duplex arrangement. Neoprene booted buttons seal out dirt […]

Stromag K/D series brakes are spring applied and electromagnetically released, providing failsafe braking. Lining wear is automatically compensated for, and brake pads feature a wear indicator. The brakes can be mounted either horizontally or vertically. Torque range: 35 to 876 lb-ft (48 to 1,188 […]