Archives

• July 30, 2018

Logan SAE Series Power Take-off (PTO) clutches are air or hydraulically actuated and are self-adjusting. They provide smooth engagement and disengagement. SAE or ISO mounting flanges are available, with optional shaft adapters for Dana and DIN flanges. Torque range: 2,400 to 18,000 lb-in (271 […]

Cervis, Inc. Warrior 22 handheld crane control is suitable for 2 motion, 2 speed applications. It’s made in the USA and is compact and ergonomic.

Logan Self-Adjusting Bell Housing PTO Clutches mount directly to the flywheel of a diesel or gasoline engine. Logan’s design eliminates mechanical linkages, hand levers, and yokes. They are available with or without pilot bearings, and modified configurations are available to meet your unique requirements. […]

Johnson rail brakes use spring force to apply pressure directly to the top of a rail head. This protects rail mounted equipment during high winds or storms. Custom options are available to cater to your application. Holding capacity: 10,000 to 100,000 lb (44 to […]

Johnson rail camps, also known as storm brakes, protect rail mounted equipment in the event of high winds or storms. A variety of options such as custom mountings, coatings, and materials are available. Holding capacity: 1,000 to 150,000 lb (4.4 to 667 kN) Typical […]

Logan CH clutches and brakes can be air or hydraulically actuated and can be used for either wet or dry operation. Pressurizing the actuating cylinder causes the clutch’s discs to clamp. Torque is then transferred from the disc pack to the splined drive ring. […]

Johnson CU and CX Series DC magnetic disc brakes are dust and drip protected, and the terminal box uses an IP55 enclosure. They are used for service duty (CU) or emergency stop duty (CX). Braking force: 809 to 50,600 lb (3.6 to 225 kN) […]

Twiflex’s Turning, Locking, and Braking System (TLB) integrates all three functions into a single system. This reduces costs, space required, and installation and maintenance time. The TLB system is fully designed and built in-house by Twiflex. Turning torques up to 334,850 lb-ft (454,000 Nm) […]

Johnson SMLB thruster brakes are constructed of fabricated steel with high temperature, non-asbestos friction linings. A variety of special options are available, such as mechanical release levers, high temperature assemblies, and explosion-proof designs. Torque range: 58 to 8,475 lb-ft (78 to 11,490 Nm) Typical […]

The Twiflex T40 brake is a split caliper, hydraulically applied design. The modules are mounted each side of a central mounting plate of the same thickness as the brake disc. Braking force: up to 10,116 lb (45 kN) Typical applications: Metals processing, conveyors, grinding […]