Archives

• July 30, 2018

The Eaton Airflex type DC element is smaller than most other type clutches with comparable torque ratings. It has low inertia and is pressure actuated and spring released. Torque range: 10,500 to 2,240,000 lb-in (1,190 to 252,900 Nm) Typical applications: Power presses, tension brakes, […]

Brunel Safety Element (SE) torque limiters are specifically designed to protect very high torque applications from overload. This modular system allows for a virtually unlimited torque capacity. SE clutches operate with no slip and completely disengage when a torque overload occurs. Special units for […]

Eaton’s DBB disc brakes are spring applied and air or hydraulically released. The rotating components’ low inertia makes the DBB ideal for cyclic applications. Torque range: 7,500 to 1,470,000 lb-in (847 to 166,101 Nm) Typical applications: Bottling equipment, conveyors, shears

The Brunel JAB torque limiter can be easily adjusted to your torque setting and is manually reset upon disengagement. During normal operation, there’s no slip, and the torque setting is maintained indefinitely. Special seals are available for dusty operating conditions. Release torque range: 10 […]

Eaton Airflex DBA disc brakes are spring applied and air or hydraulically released. The brake’s large friction area allows it to absorb and dissipate high energy loads. Lining wear adjustments aren’t required for single disc units, and dual disc units require only one wear […]

Brunel Corporation’s Type JB torque limiters provide instant release at the preset torque. Once the overload releases the clutch, the hub travels one revolution before the clutch automatically re-engages. This makes JB torque limiters perfect for applications where restart must occur in the correct […]

Eaton Airflex water-cooled brakes are disc type, externally cooled units. These brakes can dissipate a large amount of heat and are available in a variety of models and sizes. Both spring-applied and air-applied options are available to suit your application. Torque range: 2,700 to […]

• July 22, 2018

Eaton Airflex’s Torque Limiting Coupling (TLC) is designed specifically to protect your grinding mill’s driveline from overloads. Slip detection control monitors system and automatically disengages the TLC if necessary. Unlike conventional torque limiting systems, the TLC is reset instantaneously, reducing equipment downtime. Slip torque […]

Eaton model CS and CSA brakes are spring set, air released brakes. This fact combined with their responsiveness makes them a great fit for emergency braking applications. These brakes are unidirectional, meaning their braking torque is greatly reduced in the reverse direction. Torque range: […]

The Eaton Airflex type VE element assembly is air actuated and utilizes a rubber air tube. When air pressure is applied, the tube expands, causing friction shoes to engage with the inside diameter of a drum. The VE has an open construction which allows […]