Archives

• July 30, 2018

Ameridrives Ameriflex diaphragm couplings offer a high torque capacity with relatively small diameter and light weight. These couplings are maintenance-free and are designed for infinite life when installed and aligned properly. Torque range: 2,500 to 500,000 lb-ft (3,390 to 677,910 Nm) Typical applications: Pumps, […]

Coremo A series brakes can be fitted with special linings twice the size of standard lining, providing a larger surface for increased thermal capacity. As with many other other Coremo models, they are available in either spring- or hydraulic-applied versions. Braking force: 1,326 to […]

Ameridrives Amerigear gear couplings use a special fully-crowned tooth with offers maximum torque capacity with minimum size. Gear couplings allow for parallel, angular, and axial misalignment. Torque range: 158 to 86,083 lb-ft (214 to 116,712 Nm) Typical applications: Pumps, conveyors, compressors, cranes, presses, steel […]

Coremo E series brakes are made from high quality ductile iron to withstand the stresses of your application. The air-actuated version’s clamping force varies based on the air pressure supplied. The spring-applied version is failsafe, as the brake caliper will clamp when air pressure […]

The Coremo Ocmea D series brake can be installed in any position about your brake disc. D series brakes are available in both air-actuated or failsafe spring-applied designs. Coremo’s quality control ensures a reliable, safe product and trouble-free operation. Braking force: 359 to 2,855 […]

As with all TDI TurboTwin series starters, T100 air starters feature a maintenance-free design and contain no plastic parts inside. Long cranking cycles and contaminated air have almost no effect on T100 series starters. Their heavy duty construction is designed for your most critical […]

The Voith SmartSet torque limiting coupling is able to slip up to 120° without releasing during short duration torque spikes. If the overload lasts longer, the coupling will fully release in order to protect the driveline. Torque range: 737 to 14,751,242 lb-ft (1 to […]

Coremo’s C series caliper brakes are air-actuated and require air pressure no greater than 6 bar. The brake is well-suited for tensioning and other applications where continuous braking is required. It can be installed in any position since it has a lever balancing and […]

Voith Turbo SafeSet torque limiting couplings protect your equipment from dangerous overloads. In the event of a torque overload, shear tubes break instantly, releasing hydraulic pressure and disconnecting the driveline. Replacing the shear tubes and repressurizing takes only a few minutes. Torque range: 737 […]

Coremo Ocmea B series caliper brakes are available in air- or spring-applied versions. These calipers are designed to withstand the mechanical and thermal stresses of your application in order to ensure safe, satisfactory performance. Braking force: 150 to 798 lbf (670 to 3,550 N) […]