Archives

• July 30, 2018

Coremo ID 3000 hydraulic brakes can operate in a wide range of temperatures, from -40° to 392° F (-40° to 200° C). The brake has an inductive ON/OFF sensor to indicate opening and closing. A wear indicator warns when maximum lining pad wear is […]

Scan-Pac 230AF and 232AF flexible molded sheeter linings are recommended for light to medium duty clutch and brake applications. Green Gripper Aramid (GGA) has a high aramid content, which allows it to be used for demanding tensioning applications. It contains no metal, giving it […]

Coremo Ocmea ID 2000 hydraulic brakes can operate in a wide range of temperatures, from -40° to 392° F (-40° to 200° C). The brake has an inductive ON/OFF sensor to indicate opening and closing. A wear indicator warns when maximum lining pad wear […]

Scan-Pac offers a wide variety of rigid molded friction materials. Scan-Pac offers flat sheets, molded brake blocks, and custom molded parts. Between the RF and Gemini series, the Rowland Company can help identify a rigid molded material to fit your needs. All Scan-Pac materials […]

The Coremo G series caliper brake is perfectly suited for a wide range of industrial applications. The calipers can be fitted with either a hydraulic- or spring-applied actuator based on the application’s requirements. Braking force: 1,258 to 3,342 lbf (5,600 to 14,868 N) Typical […]

Ameridrives Americardan driveshafts are a great option when higher operating angles are necessary. A variety of arrangements are available to meet your application’s torque, speed, length, and angular requirements. Torque range: 86 to 1,891,846 lb-ft (117 to 2,565,000 Nm) Typical applications: Paper mills, steel […]

For applications requiring clamping force to be regulated, Coremo Ocmea F series hydraulically-actuated brakes are a great option. For applications requiring failsafe braking, such as emergency brakes or holding brakes, F series spring-applied brakes are available in two sizes to meet your braking needs. […]

Ameridrives Torsiflex-i disc couplings are designed specifically for process pumps, and can also be used in general industrial applications. Their drop-in spacer design allows for easy installation without moving the hubs. A zinc phosphate coating is standard, with other materials and coatings also available. […]

Coremo D series brakes are ideal for a variety of industrial applications. Hydraulic- or spring-applied options are available to best suit the requirements of your application. Braking force: 1,258 to 3,342 lbf (5,600 to 14,868 N) Typical applications: Steel processing, conveyors, wind turbines, amusement […]

TDI T50 pre-engaged and inertia-engaged air starters are versatile, mid-size options designed for a wide variety of engines. The T50 offers the most power and torque per unit of air and is the lightest air starter in its class, weighing as little as 34 […]