Archives

• July 30, 2018

TDI TurboStart 56 series air starters are specifically designed for gas turbine engines. The TDI 56 series costs significantly less than most competitive products and boasts a simple, efficient design. These starters use a unique 22-point sprag clutch, which is more reliable than the […]

FSR series overrunning clutches from Formsprag are sleave bearing supported and suitable for general purpose overrunning, indexing, and backstopping applications. A keyseat and snap-ring groove are provided to secure attached parts to the hub. Torque range: 40 to 1,800 lb-ft (55 to 2,448 Nm) […]

TDI’s T25 and T20 turbine air starters are constructed from durable, high quality, corrosion-resistant materials. Standard and low pressure versions are available to suit your application. Both starters feature an integrated relay valve, which simplifies installation and keeps costs down. Torque range: 40 to […]

Scan-Pac sintered friction products are designed to operate in applications where high energy dynamic stopping produces extreme heat. Good thermal conductivity is achieved with high concentrations of metallic fibers. Custom shapes, sizes, and formulations are available to best suit your application. Coefficients of friction: […]

Formsprag’s HPI indexing clutches are designed for medium to heavy-duty indexing applications. They are used to convert reciprocating linear motion into incremental, uniform rotary motion. Washdown options are available. Formsprag clutches are designed for long and dependable life. Torque range: 275 to 27,000 lb-ft […]

TDI’s T25 and T20 turbine air starters are constructed from durable, high quality, corrosion resistant materials. Standard and low pressure versions are available to suit your application. Both starters feature an integrated relay valve, which simplifies installation and keeps costs down. Click here for […]

Gatke is a phenolic material from Scan-Pac formulated with high-strength fabrics and long-lasting resins. Gatke bearings are lightweight and offer long wear life. They withstand the most demanding applications and are available in a variety of shapes. Coefficients of friction: 0.2 to 0.5 Static; […]

Formsprag model FSO overrunning clutches are through-shaft mounted, with the inner race driven by a key. They are suitable for overrunning, backstopping, and light to medium-duty indexing applications. Wash-down duty options are available if necessary. Torque range: 275 to 27,000 lb-ft (374 to 36,720 […]

Scan-Pac’s woven friction materials are flexible and available in a variety of widths and thicknesses. These non-asbestos materials offer a consistent high friction level and good wear rate. Green Gripper Woven (GGW) is a versatile material for heavy-duty industrial applications. Gemini Woven is a […]

Available in pre-engaged and inertia-engaged models, the T30 generates up to 25% more stall torque than other starters in its class. Its highly efficient twin-turbine motor design gives you more cranking power with less air for faster starts. Unlike starters that require a mechanical […]